How to make a cat scratching post with cardboard: Easy Step

Learn how to make a cat scratching post with cardboard. A quick and easy guide on how to make a cat scratching post with cardboard. Cats are known for their love of scratching furniture. Not only is it bad for your furniture, but it’s also bad for your cat’s claws. Scratching is a natural behavior that helps them maintain their claws and keep the outer layer of the nail bed healthy. When they scratch, cats use an extra set of muscles to stretch out their back and release tension in their neck and shoulders. They also sharpen the claws on their front paws, which prevents them from getting caught in carpet fibers or other items on the ground.

Luckily, there are ways to provide your kitty with a comfortable place to scratch by making a DIY cat scratching post out of cardboard. Here’s how!

Introduction

The reason cats scratch furniture is because they need to sharpen their claws. This needs to be done to avoid getting caught in carpets or other things on the ground. If your pet continues scratching your furniture, there are steps you can take to keep them from doing it again. One solution is the DIY cardboard cat scratching post, which will provide a happy place for your cat to scratch.

How to make a cat scratching post with cardboard

A cardboard scratching post can be a great option for those who don’t want to spend the money on a cat tree. Here’s how to make one:

– First, cut a piece of cardboard into an A-frame shape. You want the base of the frame to be about six inches wide and two feet tall, and you want it to be about 30 inches long. If you’re having trouble getting your measurements right, it might help to lay your cardboard on the ground and measure from the base up.

– Next – so that your kitty has something to scratch – start cutting out some pieces of corrugated cardboard. The pieces should be about one inch by two inches and can be as long as you want them to be (you can cut as many as you need).

– Now that you have all these pieces of corrugated cardboard, start gluing them onto the inside part of your A-frame with hot glue or other adhesive. Glue them in sections so that they’re not overlapping and so that there’s space between each piece. When you’re done gluing all your pieces, simply fold over the top flap of the frame and use duct tape or even more hot glue to secure it shut

Materials

– Cardboard

– Tape

– Scissors

– Ruler or straight edge

Find the best cat scratching post for your kitty at Cat Scratch Fever. Read reviews and shop online for the best cat scratchier.

Steps

1. Cut a piece of cardboard to the desired height for your cat scratching post.

2. Cut out an oval shape to make a hole in the center of the post. It should be slightly smaller than the size of your cat’s head and should create even sides on either side of it.

3. Cut 4-5 pieces of cardboard and arrange them to form a rectangle inside the oval opening, leaving space at the bottom for your cat to scratch and adding small pieces if necessary to make sure they’re all even in height with one another.

4. Tape one end of a long strip of paper together with about 3 inches extra hanging off on either side and then tape that paper around the outside edge of each column you created, wrapping from one column to the next until you’ve completely wrapped it around all four columns twice and have a paper tube with a center opening at its top.

5) Pull up any slack in the edges so that it creates a tight seal around each column or use additional scotch tape if necessary.

6) Put this underneath your cat scratching post so that it sits flush against the floor when you put it down, then add some catnip inside for added interest!

Step 1 – Gather materials and tools

You’ll need:

– Cardboard

– Scissors

– Tape (optional)

– Catnip (optional)

– Treats (optional)

Cut the cardboard into a rectangle shape

You want the scratching post to be tall enough for your cat to stretch up and down. You can make it as wide or as tall as you like, but we recommend making it at least 4 inches tall and 18 inches long. The taller and wider you make it, the more comfortable it will be for your cat. The width of the post should depend on whether or not you want to tape it to a table or chair; we recommend taping the post to furniture if possible to avoid it being knocked over accidentally.

Step 2 – Cut four pieces of cardboard

Cut four pieces of cardboard to the same size.

Cut the corners off two of the pieces to round them out. These will be the “feet” for your scratching post.

Draw a line in the middle of one of the remaining pieces and cut that in half, making two rectangles. These will be your scratching posts.

Paint or cover any visible cardboard with painters tape before assembling your scratch post so it matches the color of your room.

Step 3 – Connect the pieces together with tape or glue

Now you have a DIY cat scratching post, but your kitty might not be use to it just yet. You can place the scratching post near furniture that they’ve been scratching and leave it there for a few days. When they use the new post instead of your furniture, reward them with treats. Soon enough, they’ll start to associate the post with their favorite treat!

Read our cat chew toys reviews to find the best cat chew toys for your feline friend.

Also You Can Buy at Cheap Price

I’m a cat owner, and I can tell you that this is the best scratching post I’ve ever seen. The base and top are weighted MDF covering the carpet. The post is made of 100% natural sisal hemp. This product is nature high quality and would be a great addition to any home with a cat.

Conclusion

Hopefully, this post has shown you that it’s easy to make a cat scratching post with cardboard. All you need are the right supplies and the right know-how! If you have any questions about this project, please comment below, and I’ll be happy to answer them.